 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 Synchronous Presettable Binary Counter The MC74AC161/74ACT161 and MC74AC163/74ACT163 are high-speed synchronous modulo-16 binary counters. They are synchronously presettable for application in programmable dividers and have two types of Count Enable inputs plus a Terminal Count output for versatility in forming synchronous multistage counters. The MC74AC161/74ACT161 has an asynchronous Master Reset input that overrides all other inputs and forces the outputs LOW. The MC74AC163/74ACT163 has a Synchronous Reset input that overrides counting and parallel loading and allows the outputs to be simultaneously reset on the rising edge of the clock. http://onsemi.com 16 1 DIP-16 N SUFFIX CASE 648 * * * * * w Synchronous Counting and Loading High-Speed Synchronous Expansion Typical Count Rate of 125 MHz Outputs Source/Sink 24 mA ACT161 and ACT163 Have TTL Compatible Inputs These devices are available in Pb-free package(s). Specifications herein apply to both standard and Pb-free devices. Please see our website at www.onsemi.com for specific Pb-free orderable part numbers, or contact your local ON Semiconductor sales office or representative. VCC 16 TC 15 Q0 14 Q1 13 Q2 12 Q3 11 CET 10 PE 9 16 1 SO-16 D SUFFIX CASE 751B 16 1 EIAJ-16 M SUFFIX CASE 966 ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 12 of this data sheet. 1 *R 2 CP 3 P0 4 P1 5 P2 6 P3 7 CEP 8 GND DEVICE MARKING INFORMATION See general marking information in the device marking section on page 11 of this data sheet. Figure 1. Pinout: 16-Lead Packages Conductors (Top View) PIN ASSIGNMENT PIN CEP CET CP MR SR P0-P3 PE Q0 -Q3 TC FUNCTION Count Enable Parallel Input Count Enable Trickle Input Clock Pulse Input (161) Asynchronous Master Reset Input (163) Synchronous Reset Input Parallel Data Inputs Parallel Enable Input Flip-Flop Outputs Terminal Count Output (c) Semiconductor Components Industries, LLC, 2006 March, 2006 - Rev. 7 1 Publication Order Number: MC74AC161/D MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 operation, as shown in the Mode Select Table. A LOW signal on MR overrides all other inputs and asynchronously forces all outputs LOW. A LOW signal on SR overrides counting and parallel loading and allows all outputs to go LOW on the next rising edge of CP. A LOW signal on PE overrides counting and allows information on the Parallel Data (Pn) inputs to be loaded into the flip-flops on the next rising edge of CP. With PE and MR (161) or SR (163) HIGH, CEP and CET permit counting when both are HIGH. Conversely, a LOW signal on either CEP or CET inhibits counting. The MC74AC161/ACT161 and MC74AC163/ACT163 use D-type edge-triggered flip-flops and changing the SR, PE, CEP and CET inputs when the CP is in either state does not cause errors, provided that the recommended setup and hold times, with respect to the rising edge of CP, are observed. The Terminal Count (TC) output is HIGH when CET is HIGH and counter is in state 15. To implement synchronous multistage counters, the TC outputs can be used with the CEP and CET inputs in two different ways. Please refer to the MC74AC568 data sheet. The TC output is subject to decoding spikes due to internal race conditions and is therefore not recommended for use as a clock or asynchronous reset for flip-flops, counters or registers. Logic Equations: Count Enable = CEP*CET*PE TC = Q0*Q1*Q2*Q3*CET 0 1 2 3 4 5 6 7 11 10 9 8 PE P0 P1 P2 P3 CEP CET TC CP *R Q0 Q1 Q2 Q3 *MR for 161 *SR for 163 Figure 2. Logic Symbol FUNCTIONAL DESCRIPTION The MC74AC161/ACT161 and MC74AC163/ACT163 count modulo-16 binary sequence. From state 15 (HHHH) they increment to state 0 (LLLL). The clock inputs of all flip-flops are driven in parallel through a clock buffer. Thus all changes of the Q outputs (except due to Master Reset of the 161) occur as a result of, and synchronous with, the LOW-to-HIGH transition of the CP input signal. The circuits have four fundamental modes of operation, in order of precedence: asynchronous reset (161), synchronous reset (163), parallel load, count-up and hold. Five control inputs - Master Reset (MR, 161), Synchronous Reset (SR, 163), Parallel Enable (PE), Count Enable Parallel (CEP) and Count Enable Trickle (CET) - determine the mode of MODE SELECT TABLE *SR L H H H H PE X L H H H CET X X H L X CEP X X H X L Action on the Rising Clock Edge ( ) Reset (Clear) Load (Pn Qn) Count (Increment) No Change (Hold) No Change (Hold) 15 14 13 12 *For 163 only H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Figure 3. State Diagram http://onsemi.com 2 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 P0 PE 161 CEP CET 163 ONLY 163 P1 P2 P3 TC CP CP 161 ONLY D CD Q0 CP CP Q D Q Q0 DETAIL A DETAIL A DETAIL A DETAIL A MR 161 SR 163 Q0 Q1 Q2 Q3 NOTE: This diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Figure 4. Logic Diagram MAXIMUM RATINGS* Symbol VCC VIN VOUT IIN IOUT ICC Tstg Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Sink/Source Current, per Pin DC VCC or GND Current per Output Pin Storage Temperature Value -0.5 to +7.0 -0.5 to VCC +0.5 -0.5 to VCC +0.5 20 50 50 -65 to +150 Unit V V V mA mA mA C *Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. http://onsemi.com 3 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN, VOUT tr, tf Supply Voltage DC Input Voltage, Output Voltage (Ref. to GND) Input Rise and Fall Time (Note 1) AC Devices except Schmitt Inputs Input Rise and Fall Time (Note 2) ACT Devices except Schmitt Inputs Junction Temperature (PDIP) Operating Ambient Temperature Range Output Current - High Output Current - Low VCC @ 3.0 V VCC @ 4.5 V VCC @ 5.5 V VCC @ 4.5 V VCC @ 5.5 V Parameter AC ACT Min 2.0 4.5 0 - - - - - - -40 - - Typ 5.0 5.0 - 150 40 25 10 8.0 - 25 - - Max 6.0 5.5 VCC - - - - - 140 85 -24 24 ns/V C C mA mA ns/V Unit V V tr, tf TJ TA IOH IOL 1. VIN from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times. 2. VIN from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times. DC CHARACTERISTICS 74AC Symbol Parameter VCC (V) TA = +25C Typ VIH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 VOL Maximum Low Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 IIN IOLD IOHD ICC Maximum Input Leakage Current Minimum Dynamic Output Current Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 1.5 2.25 2.75 1.5 2.25 2.75 2.99 4.49 5.49 - - - 0.002 0.001 0.001 - - - - - - - 74AC TA = -40C to +85C Unit Conditions Guaranteed Limits 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86 0.1 0.1 0.1 0.36 0.36 0.36 0.1 - - 8.0 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.46 3.76 4.76 0.1 0.1 0.1 0.44 0.44 0.44 1.0 75 -75 80 V VOUT = 0.1 V or VCC - 0.1 V VOUT = 0.1 V or VCC - 0.1 V IOUT = -50 mA VIL V VOH V V *VIN = VIL or VIH -12 mA IOH -24 mA -24 mA IOUT = 50 mA V V *VIN = VIL or VIH 12 mA IOL 24 mA 24 mA VI = VCC, GND VOLD = 1.65 V Max VOHD = 3.85 V Min VIN = VCC or GND mA mA mA mA *All outputs loaded; thresholds on input associated with output under test. Maximum test duration 2.0 ms, one output loaded at a time. NOTE: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC. http://onsemi.com 4 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 AC CHARACTERISTICS (For Figures and Waveforms - See Section 3 of the ON Semiconductor FACT Data Book, DL138/D) 74AC161 Symbol Parameter VCC* (V) Min fmax tPLH tPHL tPLH tPHL tPLH tPHL tPHL tPHL Maximum Count Frequency Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP to TC Propagation Delay CP to TC Propagation Delay CET to TC Propagation Delay CET to TC Propagation Delay MR to Qn Propagation Delay MR to TC 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 70 110 2.0 1.5 1.5 1.5 3.0 2.0 3.5 2.0 2.0 1.5 2.5 2.0 2.0 1.5 3.5 2.5 TA = +25C CL = 50 pF Typ 111 167 7.0 5.0 7.0 5.0 9.0 6.0 8.5 6.5 5.5 3.5 6.5 5.0 6.0 5.5 10.0 8.5 Max - - 12.0 9.0 12.0 9.5 15.0 10.5 14.0 11.0 9.5 6.5 11.0 8.5 12.0 9.5 15.0 13.0 74AC161 TA = -40C to +85C CL = 50 pF Min 60 95 1.5 1.0 1.5 1.5 2.5 1.5 2.5 2.0 1.5 1.0 2.0 1.5 1.5 1.5 3.0 2.5 Max - - 13.5 9.5 13.0 10.0 16.5 11.5 15.5 11.5 11.0 7.5 12.5 9.5 13.5 10.0 17.5 13.5 MHz ns ns ns ns ns ns ns ns 3-3 3-6 3-6 3-6 3-6 3-6 3-6 3-6 3-6 Unit Fig. No. *Voltage Range 3.3 V is 3.3 V 0.3 V. *Voltage Range 5.0 V is 5.0 V 0.5 V. AC CHARACTERISTICS (For Figures and Waveforms - See Section 3 of the ON Semiconductor FACT Data Book, DL138/D) 74AC163 Symbol Parameter VCC* (V) Min fmax tPLH tPHL tPLH tPHL tPLH tPHL Maximum Count Frequency Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP to TC Propagation Delay CP to TC Propagation Delay CET to TC Propagation Delay CET to TC 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 70 110 2.0 1.5 1.5 1.5 3.0 2.0 3.5 2.0 2.0 1.5 2.5 2.0 TA = +25C CL = 50 pF Typ 95 140 7.5 5.5 8.5 6.0 9.5 7.0 11.0 8.0 7.5 5.5 8.5 6.0 Max - - 12.5 9.0 12.0 9.5 15.0 10.5 14.0 11.0 9.5 6.5 11.0 8.5 74AC163 TA = -40C to +85C CL = 50 pF Min 60 95 1.5 1.0 1.5 1.5 2.5 1.5 2.5 2.0 1.5 1.0 2.0 1.5 Max - - 13.5 9.5 13.0 10.0 16.5 11.5 15.5 11.5 11.0 7.5 12.5 9.5 MHz ns ns ns ns ns ns 3-3 3-6 3-6 3-6 3-6 3-6 3-6 Unit Fig. No. *Voltage Range 3.3 V is 3.3 V 0.3 V. *Voltage Range 5.0 V is 5.0 V 0.5 V. http://onsemi.com 5 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 AC OPERATING REQUIREMENTS 74AC161 Symbol Parameter VCC* (V) Typ ts th ts th ts th tw tw tw trec Setup Time, HIGH or LOW Pn to CP Hold Time, HIGH or LOW Pn to CP Setup Time, HIGH or LOW PE to CP Hold Time, HIGH or LOW PE to CP Setup Time, HIGH or LOW CEP or CET to CP Hold Time, HIGH or LOW CEP or CET to CP Clock Pulse Width (Load) HIGH or LOW Clock Pulse Width (Count) HIGH or LOW MR Pulse Width, LOW Recovery TIme MR to CP 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 6.0 3.5 -7.0 -4.0 6.5 4.0 -6.0 -3.5 3.0 2.0 -3.5 -2.0 2.0 2.0 2.0 2.0 3.0 2.5 -2.0 -1.0 TA = +25C CL = 50 pF 74AC161 TA = -40C to +85C CL = 50 pF Unit Fig. No. Guaranteed Minimum 13.5 8.5 -1.0 0 11.5 7.5 0 0.5 6.0 4.5 0 0 3.5 2.5 4.0 3.0 5.5 4.5 -0.5 0 16.0 10.5 -0.5 0 14.0 8.5 0 1.0 7.0 5.0 0 0.5 4.0 3.0 4.5 3.5 7.5 6.0 0 0.5 ns ns ns ns ns ns ns ns ns ns 3-9 3-9 3-9 3-9 3-9 3-9 3-6 3-6 3-6 3-9 *Voltage Range 3.3 V is 3.3 V 0.3 V. *Voltage Range 5.0 V is 5.0 V 0.5 V. http://onsemi.com 6 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 AC OPERATING REQUIREMENTS 74AC163 Symbol Parameter VCC* (V) Typ ts th ts th ts th ts th tw tw Setup Time, HIGH or LOW Pn to CP Hold Time, HIGH or LOW Pn to CP Setup Time, HIGH or LOW SR to CP Hold Time, HIGH or LOW SR to CP Setup Time, HIGH or LOW PE to CP Hold Time, HIGH or LOW PE to CP Setup Time, HIGH or LOW CEP or CET to CP Hold Time, HIGH or LOW CEP or CET to CP Clock Pulse Width (Load) HIGH or LOW Clock Pulse Width (Count) HIGH or LOW 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 5.5 4.0 -7.0 -5.0 5.5 4.0 -7.5 -5.5 5.5 4.0 -7.5 -5.0 3.5 2.5 -4.5 -3.0 3.0 2.0 3.0 2.0 TA = +25C CL = 50 pF 74AC163 TA = -40C to +85C CL = 50 pF Unit Fig. No. Guaranteed Minimum 13.5 8.5 -1.0 0 14 9.5 -1.0 -0.5 11.5 7.5 -1.0 -0.5 6.0 4.5 0 0 3.5 2.5 4.0 3.0 16.0 10.5 -0.5 0 16.5 11.0 -0.5 0 14.0 8.5 -0.5 0 7.0 5.0 0 0.5 4.0 3.0 4.5 3.5 ns ns ns ns ns ns ns ns ns ns 3-9 3-9 3-9 3-9 3-9 3-9 3-9 3-9 3-6 3-6 *Voltage Range 3.3 V is 3.3 V 0.3 V. *Voltage Range 5.0 V is 5.0 V 0.5 V. http://onsemi.com 7 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 DC CHARACTERISTICS 74ACT Symbol Parameter VCC (V) TA = +25C Typ VIH VIL VOH Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage 4.5 5.5 4.5 5.5 4.5 5.5 4.5 5.5 VOL Maximum Low Level Output Voltage 4.5 5.5 4.5 5.5 IIN DICCT IOLD IOHD ICC Maximum Input Leakage Current Additional Max. ICC/Input Minimum Dynamic Output Current Maximum Quiescent Supply Current 5.5 5.5 5.5 5.5 5.5 1.5 1.5 1.5 1.5 4.49 5.49 - - 0.001 0.001 - - - 0.6 - - - 74ACT TA = -40C to +85C Unit Conditions Guaranteed Limits 2.0 2.0 0.8 0.8 4.4 5.4 3.86 4.86 0.1 0.1 0.36 0.36 0.1 - - - 8.0 2.0 2.0 0.8 0.8 4.4 5.4 3.76 4.76 0.1 0.1 0.44 0.44 1.0 1.5 75 -75 80 V V V VOUT = 0.1 V or VCC - 0.1 V VOUT = 0.1 V or VCC - 0.1 V IOUT = -50 mA *VIN = VIL or VIH -24 mA IOH -24 mA IOUT = 50 mA *VIN = VIL or VIH 24 mA IOL 24 mA VI = VCC, GND VI = VCC - 2.1 V VOLD = 1.65 V Max VOHD = 3.85 V Min VIN = VCC or GND V V V mA mA mA mA mA *All outputs loaded; thresholds on input associated with output under test. Maximum test duration 2.0 ms, one output loaded at a time. http://onsemi.com 8 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 AC CHARACTERISTICS (For Figures and Waveforms - See Section 3 of the ON Semiconductor FACT Data Book, DL138/D) 74ACT161 Symbol Parameter VCC* (V) Min fmax tPLH tPHL tPLH tPHL tPLH tPHL tPHL tPHL Maximum Count Frequency Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP or Qn (PE Input HIGH or LOW) Propagation Delay CP to TC Propagation Delay CP to TC Propagation Delay CET to TC Propagation Delay CET to TC Propagation Delay MR to Qn Propagation Delay MR to TC 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 115 1.5 1.5 2.0 1.5 1.5 1.5 1.5 2.5 TA = +25C CL = 50 pF Typ 125 8.0 8.0 11.0 11.0 7.5 8.0 8.0 10.0 Max - 9.5 10.5 11.0 12.5 8.5 9.5 10.0 13.5 74ACT161 TA = -40C to +85C CL = 50 pF Min 100 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 Max - 10.5 11.5 12.5 13.5 10.0 10.5 11.0 14.5 MHz ns ns ns ns ns ns ns ns 3-3 3-6 3-6 3-6 3-6 3-6 3-6 3-6 3-6 Unit Fig. No. *Voltage Range 5.0 V is 5.0 V 0.5 V. AC CHARACTERISTICS (For Figures and Waveforms - See Section 3 of the ON Semiconductor FACT Data Book, DL138/D) 74ACT163 Symbol Parameter VCC* (V) Min fmax tPLH tPHL tPLH tPHL tPLH tPHL Maximum Count Frequency Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP to Qn (PE Input HIGH or LOW) Propagation Delay CP to TC Propagation Delay CP to TC Propagation Delay CET to TC Propagation Delay CET to TC 5.0 5.0 5.0 5.0 5.0 5.0 5.0 120 1.5 1.5 2.5 3.0 2.0 2.0 TA = +25C CL = 50 pF Typ 140 5.5 6.0 7.0 8.0 5.5 6.0 Max - 10.0 11.0 11.5 13.5 9.0 10.0 74ACT163 TA = -40C to +85C CL = 50 pF Min 105 1.5 1.5 2.0 2.0 1.5 2.0 Max - 11.0 12.0 13.5 15.0 10.5 11.0 MHz ns ns ns ns ns ns 3-3 3-6 3-6 3-6 3-6 3-6 3-6 Unit Fig. No. *Voltage Range 5.0 V is 5.0 V 0.5 V. http://onsemi.com 9 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 AC OPERATING REQUIREMENTS 74ACT161 Symbol Parameter VCC* (V) Typ ts th ts th ts th tw tw tw trec Setup Time, HIGH or LOW Pn to CP Hold Time, HIGH or LOW Pn to CP Setup Time, HIGH or LOW PE to CP Hold Time, HIGH or LOW PE to CP Setup Time, HIGH or LOW CEP or CET to CP Hold Time, HIGH or LOW CEP or CET to CP Clock Pulse Width (Load) HIGH or LOW Clock Pulse Width (Count) HIGH or LOW MR Pulse Width, LOW Recovery Time MR to CP 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.0 -3.0 6.0 -3.5 4.0 -2.0 2.0 2.0 3.0 0 TA = +25C CL = 50 pF 74ACT161 TA = -40C to +85C CL = 50 pF Unit Fig. No. Guaranteed Minimum 9.5 0 8.5 - 0.5 5.5 0 3.0 3.0 3.0 0 11.5 0 9.5 - 0.5 6.5 0 3.5 3.5 7.5 0.5 ns ns ns ns ns ns ns ns ns ns 3-9 3-9 3-9 3-9 3-9 3-9 3-6 3-6 3-6 3-9 *Voltage Range 5.0 V is 5.0 V 0.5 V. http://onsemi.com 10 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 AC OPERATING REQUIREMENTS 74ACT163 Symbol Parameter VCC* (V) Typ ts th ts th ts th ts th tw tw Setup Time, HIGH or LOW Pn to CP Hold Time, HIGH or LOW Pn to CP Setup Time, HIGH or LOW SR to CP Hold Time, HIGH or LOW SR to CP Setup Time, HIGH or LOW PE to CP Hold Time, HIGH or LOW PE to CP Setup Time, HIGH or LOW CEP or CET to CP Hold Time, HIGH or LOW CEP or CET to CP Clock Pulse Width HIGH or LOW Clock Pulse Width (Count) HIGH or LOW 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.0 -5.0 4.0 -5.5 4.0 -5.5 2.5 -3.0 2.0 2.0 TA = +25C CL = 50 pF 74ACT163 TA = -40C to +85C CL = 50 pF Unit Fig. No. Guaranteed Minimum 10.0 0.5 10.0 -0.5 8.5 -0.5 5.5 0 3.5 3.5 12.0 0.5 11.5 -0.5 10.5 0 6.5 0.5 3.5 3.5 ns ns ns ns ns ns ns ns ns ns 3-9 3-9 3-9 3-9 3-9 3-9 3-9 3-9 3-6 3-6 *Voltage Range 5.0 V is 5.0 V 0.5 V. CAPACITANCE Symbol CIN CPD Input Capacitance Power Dissipation Capacitance Parameter Value Typ 4.5 45 Unit pF pF Test Conditions VCC = 5.0 V VCC = 5.0 V MARKING DIAGRAMS DIP-16 MC74AC16xN AWLYYWW SO-16 AC16x AWLYWW EIAJ-16 74AC16x ALYW MC74ACT16xN AWLYYWW ACT16x AWLYWW 74ACT16x ALYW x A WL, L YY, Y WW, W = 1 or 3 = Assembly Location = Wafer Lot = Year = Work Week http://onsemi.com 11 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 ORDERING INFORMATION Device MC74AC161N MC74ACT161N MC74AC161D MC74AC161DR2 MC74ACT161D MC74ACT161DR2 MC74AC161M MC74ACT161MEL MC74AC163N MC74ACT163N MC74AC163D MC74AC163DR2 MC74ACT163D MC74ACT163DR2 MC74AC163MEL MC74ACT163MEL Package PDIP-16 PDIP-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 EIAJ-16 EIAJ-16 PDIP-16 PDIP-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16 EIAJ-16 EIAJ-16 Shipping 25 Units/Rail 25 Units/Rail 48 Units/Rail 2500 Tape & Reel 48 Units/Rail 2500 Tape & Reel 50 Units/Rail 2000 Tape & Reel 25 Units/Rail 25 Units/Rail 48 Units/Rail 2500 Tape & Reel 48 Units/Rail 2500 Tape & Reel 2000 Tape & Reel 2000 Tape & Reel http://onsemi.com 12 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 PACKAGE DIMENSIONS PDIP-16 N SUFFIX 16 PIN PLASTIC DIP PACKAGE CASE 648-08 ISSUE R 9 -A- 16 B 1 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01 F S C L -T- H K G D 16 PL SEATING PLANE J TA M M 0.25 (0.010) M SO-16 D SUFFIX 16 PIN PLASTIC SOIC PACKAGE CASE 751B-05 ISSUE J -A- 16 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 -B- 1 8 P 8 PL 0.25 (0.010) M B S G F K C -T- SEATING PLANE R X 45 _ M D 16 PL M J 0.25 (0.010) TB S A S http://onsemi.com 13 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 PACKAGE DIMENSIONS EIAJ-16 M SUFFIX 16 PIN PLASTIC EIAJ PACKAGE CASE966-01 ISSUE O 16 9 LE Q1 E HE M_ L DETAIL P 1 8 Z D A VIEW P c NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). DIM A A1 b c D E e HE L LE M Q1 Z MILLIMETERS MIN MAX --- 2.05 0.05 0.20 0.35 0.50 0.18 0.27 9.90 10.50 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 _ 0_ 0.70 0.90 --- 0.78 INCHES MIN MAX --- 0.081 0.002 0.008 0.014 0.020 0.007 0.011 0.390 0.413 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 _ 0_ 0.028 0.035 --- 0.031 e b 0.13 (0.005) M A1 0.10 (0.004) http://onsemi.com 14 MC74AC161, MC74ACT161, MC74AC163, MC74ACT163 Notes ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 15 MC74AC161/D |
Price & Availability of MC74AC161DR2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |